在symbian上随心控制红外线（5） ------ 常用的红外控制协议

 Philips RC-5 Protocol
http://blog.csdn.net/mickeyfirst/archive/2008/01/27/2069017.aspx

Philips RC-6 Protocol 

http://blog.csdn.net/mickeyfirst/archive/2008/01/28/2070507.aspx


NEC协议
http://blog.csdn.net/mickeyfirst/archive/2008/01/28/2070588.aspx

Philips RC-MM protocol
http://blog.csdn.net/mickeyfirst/archive/2008/01/28/2070508.aspx

Comments

Post a Comment

Popular posts from this blog

在symbian上随心控制红外线（7） ------ 答疑篇

They have to do with the remote control protocols. Signal gap is the delay between each signal that the remote sends. Signal length is how many 0s and 1s are sent for each code. Repeat codes are used by some remotes to indicate that you're holding a button down -- instead of just sending the same key over and over, it sends the key once and then sends a special code that indicates it's being held. Typical remote controls use a 38KHz carrier wave for modulation, and that normally has a 50% duty cycle.
Read more

listbox中使用svg图片

Image
这些天尽管有源源不断的pr过来，但是还是有时间搞搞listbox。之所以搞这个是因为在NewLc上看到有不少人问类似的问题，而且我觉得在UI开发中Listbox经常用到。计划在一周内抽时间把S60上的所有标准listbox都深入研究一下。 今天在使用CAknSingleGraphicStyleListBox的时候，没有合适的icon用，正好手边有一些svg图片就试了一下，发现可以使用。这下好了svg图片可大可小，不用考虑尺寸问题。 如果用carbid c++ ide的话，可以直接用ide提供的功能编辑和创建mbm/mif文件。如下图所示启动编辑器 目前，我通过makefile文件生成mif文件。首先创建一个makefile文件icon.mk，然后在bld文件中加入 gnumakefile icon.mk 即可。 其实也可以在mmp文件中加入 prj_extensions start extension s60/mifconc option targetfile icon.mif ..... option source .... end 来替代那个makefile文件 SVG图片的使用方法不同于bmp。bmp通过bmpconv工具被整合为一个mbm（multi-bitmap）文件，这是symbian独有的文件格式。而svg通过mifconv工具整合为mif(MSX interchange format)文件,在Mif文件中也可以加入bmp。 由于mif的支持不是symbian提供的，所以用createiconl这样的方法只能加载mbm文件，不能加载mif文件，需要用aknsutils::creategulicon加载。加载后，使用方法跟通常一样。
Read more

Carbide.c++ 2.0 免费下载

 Application developers are encouraged to install the Developer or Professional Edition. The OEM Edition is recommended for device manufacturers.   Supported new features and improvements Support for S60 5th Edition (in particular Touch UI and Platform Services). Addition of several Touch design components to the UI Designer tool. Users can touch-enable basic user interface applications using this graphical tool. Support for Qt development tools for S60 (expect updated Qt SDK’s next year) Improved connection and reporting for On-Device Debugging. Knowledgebase Scanner is a new addition to the CodeScanner static analysis tool. Knowledgebase Scanner scans the user’s code and provides advice for adding touch capabilities to existing applications. Improved speed and accuracy of code completion aids. Improved rendering for the Performance Investigator tool (Available in PRO and OEM Editions). http://www.forum.nokia.com/info/sw.nokia.com/id/dbb8841d-832c-43a6-be13...
Read more